Hembry Creek RVT310SGG Guide d'installation télécharger pdf

SUGGESTED TOOLS AND MATERIALS

Sealant Tape Measure Safety Glasses

10'

VESSEL TOP INSTALLATION

INSTALLATION INSTRUCTIONS

REFLEX GLASS VESSEL TOP

CARE AND CLEANING

For best results in caring for your Reflex glass top, we suggest:

- Always wipe off spills immediately.

- Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to

the entire surface.

- Wipe surfaces clean, immediately after applying cleaner.

- Do not allow cleaner to sit or soak. Never let cleaners sit on the surface of the glass for long periods of time.

- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean

surfaces. They will scratch the surface of the glass top and lavatory.

- Always rinse and wipe clean the fixtures to prevent soap buildup.

For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time

Apply bead of quality sealant evenly

along the top of the vanity

Apply silicone sealant evenly along

the bottom of backsplash and wall

Place the bottom side of back splash with sealant

onto the countertop and check alignment of backsplash.

Adjust the leg levelers as needed

Carefully, install the vessel sink, mounting ring

and drain. See manufacturers instructions

** NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only

™

by XYLEM

all models

Page 1

SUGGESTED TOOLS AND MATERIALS Sealant Tape Measure Safety Glasses10'1VESSEL TOP INSTALLATION3INSTALLATION INSTRUC

Pas de commentaire

Hembry Creek RVT310SGG Guide d'installation